Preparation
• Prepare two FliteSim.com Force Feedback (FFB) yokes (they can be of different models) (Please ensure the firmware versions are identical)
• Connect each of the yoke directly to your PC using the supplied USB-C to USB-A cable
Startup Procedure
Ensure FFB Tools V3 is closed (i.e. NOT opened)
Power up both FFB yokes, wait for their self-test to complete
Open FFB Tools V3 to auto-connect both yokes
Enable Long-Press (During flight, the master yoke can override the slave yoke via long-pressing Button 1.
To enable this feature: Navigate to Yoke > Device Settings > Enable Long-Press > ON. Hit Apply.
Enable Master-Slave yoke exchange (Optional):
To enable this feature: Navigate to Yoke > Device Settings > Exchange Master > ON. Hit Apply.
Proceed with normal flight simulator usage.
(We recommend you wait until the two yokes have fully completed their self-test before opening FFB Tools V3 software and enabling the Yoke Synchronization function to avoid the synchronization data affecting the yoke calibration)
Button 1 is the default Master-Slave switching button (This can be changed in the FFBTools V3 software under Device Settings > Grip Settings > Synchronization Key Set)
